<aside> ❄️ This user guide is intended for the A/C Solutions E30 24v Swap Conversion Kit
</aside>
Welcome to the official A/C Solutions E30 24v Swap Conversion Kit user guide. This document contains product specifications, installation instructions, and troubleshooting for the E30 chassis. This user guide is intended for the BMW owner with basic mechanical skills; however, the evacuation and charging of freon should be handed by a licensed A/C professional. Assembly instructions assume the vehicle is stock and still retains all its original equipment. Always conform to basic safety standards and procedures when working with automotive chemicals, tools, and electrical equipment. If you are uncertain about your mechanical abilities during the removal or installation, please consult a certified professional mechanic.
Have a question or just want to say hello? Send us a message
Tools and equipment needed for removal will vary by model/year.
Depending on the condition of the vehicle, the following components should be inspected for proper functionality/leaks/damage/etc. prior to the assembly of the new system as they will affect A/C cooling performance. Ohm values and other system specifications can be found in your BMW workshop manual. Freon operates in a closed system and will not function properly with leaks. It is imperative that the system be flushed and decontaminated prior to installing the new components.
A/C high-pressure switch (ensure ohm values are within range; inspect for leaks)
Note → There are 2 primary versions of the filter drier - early model and late model (learn more).