<aside> ❄️ This user guide is intended for the A/C Solutions BMW E30 Complete Conversion Kit

</aside>

<aside> 🎬 Check out our new **E30 installation video!**

</aside>

About

Welcome to the official A/C Solutions E30 Sanden Conversion Kit user guide. This document contains product specifications, installation instructions, and troubleshooting for the E30 chassis. This user guide is intended for the BMW owner with basic mechanical skills; however, the evacuation and charging of freon should be handed by a licensed A/C professional. Assembly instructions assume the vehicle is stock and still retains all its original equipment. Always conform to basic safety standards and procedures when working with automotive chemicals, tools, and electrical equipment. If you are uncertain about your mechanical abilities during the removal or installation, please consult a certified professional mechanic.

Contact us

Have a question or just want to say hello? Send us a message

What’s in this user guide?

Tools Needed for Assembly

Tools and equipment needed for removal will vary by model/year.

• Metric combo wrench set
• Metric socket set
• Combo crimp tool
• Pencil torch/lighter (for heat shrink)
• PAG oil (for O-ring installation)
• PTFE thread sealant or freon compatible sealer

Diagrams

Pre-installation system check

Depending on the condition of the vehicle, the following components should be inspected for proper functionality/leaks/damage/etc. prior to the assembly of the new system as they will affect A/C cooling performance. Ohm values and other system specifications can be found in your BMW workshop manual. Freon operates in a closed system and will not function properly with leaks. It is imperative that the system be flushed and decontaminated prior to installing the new components.